Our New IER compatible thermal printhead is available for shipment worldwide. This is a brand-new IER OEM Compatible Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New and Made in the USA.

Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.

Bizerba KD2006-DC91B Thermal Printhead Part No 65620170901

Specifications

•  Technology: Piezo Electric
•  Max Resolution: 1000 dpi
•  Cal Droplet Size: 15 pico litre
•  Adj Range for Droplet Size: 1530 pico litre
•  Tot Amount of Nozzles: 512
•  Nozzle Spacing: 127 microns (1 colour) or 254 microns (2 colours)
•  Firing Frequency: 40 kHz (20 kHz for 30 pico litre droplets)
•  Operating Temperature: up to 60°C
•  Ink Compatibility: Solvent, waterbased and UV Inks

Specifications

• Technology: Piezo Electric
• Max. Resolution: 800 dpi
• Cal. Droplet Size: 35 pico litre
• Adj. Range for Droplet Size: 35-80 pico litre
• Tot. Amount of Nozzles: 512
• Nozzle Spacing: 127 microns (1 colour) or 254 microns (2 colours)
• Firing Frequency: 30 kHz (15 kHz for 80 pico litre droplets)
• Operating Temperature: up to 60°C
• Ink Compatibility: Solvent, water-based and UV Inks

Original Intermec 1-010012-90 Thermal Printhead

Intermec 1-010012-90 Thermal Printheads

Intermec U6 - Replacement printhead, 203 dpi

Country of Origin: Made in China. Engineered by Sato.
Rockwell Surface Hardness Rating: 33
Environmental Protection: Pressure Sealed Circuits
Installation: OEM Printhead. Drop and Go.

This OEM Printhead is also known by the following Part Numbers: WWM845810

Our Sato OEM Printhead works in the following printer models: Sato: M84 Pro

Our Warranty is Sato's warranty. Our New Sato thermal printhead is available for shipment worldwide. This is a brand-new Sato OEM Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New.

Avery Dennison Printhead AP7.t

Printhead Assembly - Rio2e

Magicard

Item : M9005-630 Manufacturer: Magicard

For use with: Rio 2e

Printronix printhead replacement products offer quality, reliability and performance. The print head is a vital component of the printer that creates the image on the face of the media. Worn or damaged print heads should be replaced immediately. All Printronix printheads are easy to install and meet the exacting engineering standards for continuous printer reliability and performance.

Printronix printhead replacement products offer quality, reliability and performance. The print head is a vital component of the printer that creates the image on the face of the media. Worn or damaged print heads should be replaced immediately. All Printronix printheads are easy to install and meet the exacting engineering standards for continuous printer reliability and performance.

This is a Genuine IBM Compatible Printhead. Genuine OEM Quality in a Non-Branded Box. This is not a rebuilt and not a re-manufactured Printhead - BRAND New, and GENUINE.

Country of Origin: Made in China. Engineered by Sato.
Rockwell Surface Hardness Rating: 33
Environmental Protection: Pressure Sealed Circuits
Installation: OEM Printhead. Drop and Go.

This OEM Printhead is also known by the following Part Numbers: R14565030

Our Sato OEM Printhead works in the following printer models: Sato: TH208

Our Warranty is Sato's warranty. Our New Sato thermal printhead is available for shipment worldwide. This is a brand-new Sato OEM Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New.

The Konica Minolta KM1024 MH print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads.

Product Specifications:
Technology: Micro-Piezo
Native resolution: 360 dpi
Min. Droplet Size: 1.5 pico litre
Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles)
Firing Frequency: 8 kHz
Ink Compatibility: eco-solvent and mild solvent
Damper type: requires DX6 Valve Dampers

Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.

Country of Origin: Made in China. Engineered in the USA.
Rockwell Surface Hardness Rating: 65
Environmental Protection: Pressure Sealed Circuits
Installation: Same as OEM. Drop in Replacement

Mainboard-6702029000 for Roland XJ-640

Country of Origin: Made in China. Engineered by Sato.
Rockwell Surface Hardness Rating: 33
Environmental Protection: Pressure Sealed Circuits
Installation: OEM Printhead. Drop and Go.

This Genuine OEM Printhead is also known by the following Part Numbers: R08329100

Our Sato OEM Printhead works in the following printer models: Sato: CT412i DT & CT412i Direct Thermal

Our Warranty is Sato's warranty. Our New Sato thermal printhead is available for shipment worldwide. This is a brand-new Sato OEM Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New.