This Kyocera KJ4B-0300 G type is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 120 m/min by making use of 2,656 nozzles arranged across 112 mm wide print swathe. Note that the firmware needs to be downgraded to run these heads on MS printers.
Specifications
Ink Type: Aqueous Ink
Dimensions: 200 × 36 × 68.5mm
Dry Weight: 540g
Total Nozzles:2.656
Standard Resolution: 300 x 300dpi
Print Width: 112mm
Max. Drive Frequency: 30kHz
Drop Volume: 5, 7, 12 and 18pl
Max. Sprint Speed: 120m/min
Typical ink viscosity: 5.0-6.0 mPa
Attention
Our printhead have serial number.
The printhead is Required to be installed by professional persons.
All our printheads are high-precision commodity and brand new, any improper operation or substandard supporting products will damage the print heads. So after receiving the goods, Please first confirm print head model and specifications.
If you face any problem, please contact our sales staff as soon as possible. Any problem after the print heads are Installed and used will be Non-refundable.
This original Kyocera KJ4A-0300 printhead is designed for high speed single-pass applications with printers using aqueous ink, multi-pass using UV inks. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 4pl at 158 m/min by making use of 2,656 nozzles arranged across 112.35 mm wide print swathe.
Original Kyocera KJ4A AA Printhead - (600 dpi - 20KHz) Use For UV ink
The GIS HIB-KY-KJ4A-AA Head Interface Board is designed to provide communications between the Kyocera KJ4A-AA 600dpi printhead and the GIS Print Manager Boards